News -

Home / News (Page 6)

Working principle and condition of underwater pelletizer template
16 Aug 2019
The template structure of the underwater pelletizer consists of four parts: the mold body, the polymer forming hole (die hole), the heating hole, and the granulation belt (hard all...
What should be paid attention to in the production operation of twin-screw extruder
10 Aug 2019
1.Before each driving of the twin-screw extruder, check whether there are any foreign objects in the cylinder, up and down the hopper, and check whether the fastening bolts of each...
How to buy high quality screws
29 Jul 2019
Although the screw is small and significant, the informal name is also called “special screw”. Because of its wide range of uses in industry, it is called “industrial rice”. Everyd...
Application and installation of anti-theft screws
27 Jul 2019
The application and installation of the anti-theft screw, as in the case of other conventional screws, the anti-theft screw also has some special functions to accomplish certain ta...
Daily use precautions for screw machines
19 Jul 2019
The life cycle of the screw machine is very long, generally more than 10 years, but it does not mean that after the air compressor is put into production, it can be used all the ti...
Prevent the injection screw from slipping
13 Jul 2019
When the injection screw is difficult to produce the material at the feeding port, or if the material does not form enough adhesive force along the length of the barrel to transpor...